| Ratemeters
/ Totalizers |
Ratemeter /
Totalizer From Analog Inputs
- High/Low
Scaling From Front Panel
- 2 Set
Points Assignable To Rate Or Total
- Display
Rate (pressure, level, watts, etc.),
Peak & Valley and Integrated Total
- 0-5V,
0-10V, 1-5V, 4-20mA or 0-20mA
Analog Input
- NEMA
4X/IP 65 Front Panel
- +24V
Output For Peripherals
- RS422/232
Serial Communications
- 4-20mA
Output
- Square
Root Extraction
- Optional
Rate Per Day Feature
|
Featuring 6 digits of bright, 7-segment LED displays, the
Intellect-69 is an integrating totalizer/ratemeter which
accepts analog signal inputs. The unit can be field programmed
to accept 4-20mA, 0-20mA, 0-5V, 0-10V or 1-5V signals. An
optional Square Law input is available for inputs that require
square root extraction. A 4-20mA output option is available to
control strip recorders or other peripherals. Two assignable
set points are standard for two stage shut off. The high and
low scaling settings are programmable from the front panel. By
pressing the "view" button, the unit will display:
integrated total, rate, peak or valley. Press the
"lock" key once to freeze the display. RS422 or
RS232 serial communications are available options for data
communication with a host computer.
|
Low Cost,
Pulse Input Totalizer/Ratemeter
- CSA
Approved
- Separate
Scaling Factors For A & B Inputs
- Display
Rate & Total
- Pulse
Input - 10 kHz Max.
- Security
Lockout
- RS422/RS232
Serial Communication
- NEMA
4X / IP65 Front Panel
- Separate
Add/Subtract Simultaneous Inputs
- Quadrature
& U/D Direction Control Inputs
- 30mV
Magnetic Pickup Inputs
- 4-20mA
or 0-20mA Analog Output
|
The MINItrol is a 6 digit totalizer / ratemeter with two
level, 5 digit preset alarm control of total or rate. Inputs A
& B have separate scaling K-factors. The totalizer can be
programmed for “A” subtract “B”, “A” add “B”
or A & B as separate totalizers, with display and control
of the “net” total and rate of "A". The MINItrol
is also available in 4 other versions. MC2: a two preset
totalizer with scaling, MR2: a high/low alarm ratemeter with
scaling; The “MC”: a totalizing counter only, and the “MR”:
a rate meter display only. If only one input is required, the
unit will display the total and rate from that one channel.
The MINItrol can accept up to 10,000 pulses per second. It has
a 5 digit floating decimal scale factor allowing total readout
in true engineering units and rate per second, minute or hour.
Input “A” simultaneously drives a ratemeter which can be
programmed to display the basic frequency (rate per second) or
factored to show rate per minute or rate per hour. Simply push
the “VIEW” button to see either total or rate without
losing a count. Two separate 5 A relay contacts can be set to
operate at either rate or total presets in a latch or
auto-recycle mode with output timing from 0.1 to 99.9 seconds.
Two control outputs can be assigned to either the totalizer or
ratemeter and can automatically recycle at the batch or stay
latched until reset.
Up to 99 units can communicate to a host computer on a single
RS232 or RS422 loop.
When two inputs are received (A & B), the unit can either
add or subtract the two inputs or display the two inputs as
separate totalizers.
|
Totalizer/Ratemeter with Separate
Scaling of Rate/Total
- Separate
Scaling Factors For Rate & Total
- Display
Rate & Total
- Count
Inhibit Input
- Security
Lockout
- RS422/RS232
Serial Communication
- NEMA
4X / IP65 Front Panel
- 4-20mA
or 0-20mA Analog Output
|
The Minitrol-S is a single input totalizer/ratemeter. The
totalizer and ratemeter each have their own 5 digit dividing
scale factor. The two 5 AMP preset relay outputs can be
programmed by the user to apply to the “A” total counter
or the “A” ratemeter. The user can view the rate, total
and grand total. The B relay can be used to create a scaled
pulse output. Magnetic pickup input, analog output and RS232
communication options are available.
|
Totalizer/Ratemeter for Paddle or
Pelton Wheel Turbine Flowmeters
- Separate
Scaling Factors For A & B Inputs
- Display
Rate & Total
- Pulse
Input - 10 kHz Max.
- Security
Lockout
- RS422/RS232
Serial Communication
- NEMA
4X / IP65 Front Panel
- 4-20mA
or 0-20mA Analog Output
|
The Minitrol-PW is a single input counter/ratemeter intended
for use with low flow paddle or pelton wheel turbine
flowmeters. Two scale factors are used to describe the
flowmeter calibration characteristics. The two 5 AMP preset
relay outputs can be programmed by the user to apply to the
"A" total counter or the "A" ratemeter.
The user can view the rate, total and grand total.
|
Economical Flow Totalizer,
Ratemeter and Batcher
- Multiple
Instrument Functions
- Menu
Selectable Hardware Features
- Two
Line LCD or VFD Display
- Automatic
Batch Overrun Compensation
- Isolated
Pulse Output Standard
- RS-232
Port Standard, RS-485 Optional
- DIN
Enclosure with Two Piece Connectors
- EZ
Setup Feature
- DDE
Server & HMI Software Available
|
The SUPERtrol-I LE Flow Computer satisfies the instrument
requirements for a variety of pulse producing flowmeter types
in liquid applications.
The
alphanumeric display shows measured and calculated parameters
in easy to understand format. Single key direct access to
measurements and display scrolling is supported
The
SUPERtrol-I LE can be programmed for rate/total indication or
batching. The various pulse inputs and outputs can be
“soft” assigned to meet a variety of common application
needs. The user “soft selects” the usage of each pulse
input while configuring the instrument.
The user
can assign the standard RS232 Serial Port for data logging,
transaction printing, or for connection to a modem for remote
meter reading. An optional RS-485 serial port using Modbus RTU
protocol is available.
A
Service or Test mode is provided to assist the user during
start-up system check out by monitoring inputs and exercising
outputs. The system setup can also be printed.
|
Multi-Function
Flow Totalizer, Ratemeter
and Batcher
- "EZ
Setup" Guided Setup for First Time Users
- Multiple
Instrument Functions
- Menu
Selectable Hardware & Software Features
- Two
Line LCD or VFD Display
- Universal
Viscosity Curve (UVC) and API Eq.
- Advanced
Batching Features: Overrun Compensation,
Autobatch Start, Print End of Batch
- Isolated
Outputs Standard
- RS232
Port Standard, RS-485 Optional
- DIN
Enclosure with Two Piece Connectors
- Windows
TM Setup Software
- On
Board Data Logging
- DDE
Server & HMI Software Available
|
The SUPERtrol-I Flow Computer satisfies the instrument
requirements for a variety of flowmeter types in liquid
applications. Multiple flow equations and instrument functions
are available in a single unit with many advanced features.
The
alphanumeric display shows measured and calculated parameters
in easy to understand format. Single key direct access to
measurements and display scrolling is supported
The
versatility of the SUPERtrol-I permits a wide measure of
versatility within the instrument package. The various
hardware inputs and outputs can be “soft” assigned to meet
a variety of common application needs. The user “soft
selects” the usage of each input/output while configuring
the instrument.
The
isolated analog output can be chosen to follow volume flow,
corrected volume flow, mass flow, temperature, or density by
means of a menu selection. Most hardware features are
assignable by this method.
The user
can assign the standard RS232 Serial Port for data logging,
transaction printing, or for connection to a modem for remote
meter reading.
A
Service or Test mode is provided to assist the user during
startup system check out by monitoring inputs and exercising
outputs and printing system setup.
|
Two Separate Ratemeters, Totalizers
with Combination Function
- Displays
A,B,&C Rate & A,B,&C Total
- Separate
scaling factors for A & B Inputs
- "C"
Displays A+B, A-B, A/B, & A/(A+B)
- Pulse
Input - 10 kHz Max
- Security
Lockout
- NEMA
4X/IP 65 Front Panel
- 30mV
Magnetic Pickup Inputs (optional)
- 4-20mA
or 0-20mA Analog Output (optional)
- CSA
Approved
|
The
DRT is a Dual Rate Totalizer. It is a dual 5 digit, 2 preset
Ratemeter/Totalizer in a 1/8 DIN Package. The user can select
1 of 6 displays to show A, B or C rate, and A, B, or C total.
Inputs A and B also have separate scaling to read in
engineering units. |
Two Separate Ratemeters, Totalizers with Two Line LCD
Display
- Two
Pulse and Three Control Inputs
- Two
Relay/Open Collector and 4-20 mA Analog outputs
- RS232
/ RS485 Port for Serial Communication & Printing
- Security
Lockout
- NVRAM
to retain data in case of power failure
- NEMA
4 / IP65 Front Panel
|
The
RTP is a presettable Ratemeter and Totalizer from two pulse
inputs. It can show rate and total at the same time on the 2 x
16 backlit LCD Display. Both inputs can have up to 16 point
linearizing k Factors. The unit can be connected in a network
for Data Acquisition.
|
Totalizer/Ratemeter
- Pulse
or Analog Input
- Display
Total, Rate or Grand Total
- Two
Alarm Outputs, User Selectable for Total,
Rate or Grand Total
- Pulse
Input to 20 kHz Count Frequency
- K-Factor
Programmable to 8 Places
- Two
Stage Security Lockout
- Two
Way RS232/422/ Communications Option
- NEMA
4X/IP 65 Front Panel
- Scalable
Analog Output of Rate or Total
- 16
Point Linearization Option
|
Featuring 8 digits of bright, .55", alpha-numeric
display, the pulse input version of the KEPtrol R/T can accept
up to 20,000 pulses per second. The analog input version
accepts inputs, such as 4 to 20mA or 1 to 5V. It uses a highly
linear integrator (V to F converter) to generate 0 to 10 kHz
digital pulses. The standard KEPtrol R/T has two separate, 8
digit, floating decimal, “K” factors to convert the inputs
to meaningful total and rate data. An optional 16 point
K-factor can linearize flow from meter outputs. The user, with
the push of a button, can toggle back and forth to view the
total of the batch, the rate of flow and the grand total
count. Two control outputs can be assigned independently by
the user to activate at preset batch total, rate or grand
total for .1 to 9.9 seconds or until reset.
A scaled pulse output is also provided by an open collector
driver. Since the output frequency is user selectable at 10,
200, 2K or 20K Hz, the unit can transmit the total data to
remote electro-mechanical or electronic totalizers as well as
computers, programmable controllers or other monitor
equipment.
An optional analog output allows the user to select low and
high settings to control strip chart recorders or other
peripherals. Up to 15 units can be connected to optional RS232
or RS422 communications port to set control points or access
data. With RS422M it is possible to communicate with up to 256
units on a single serial link. This option is also compatible
with Opto 22’s Optomux Network.
|
Rate and Total
Indicators with
Pulse or Analog Inputs
- 6
Digit, LED Display with Very High Luminosity 0.315"
(8mm) Digit height
- DIN
Housing, 1.88"x9.44"
- Easy
Programming with Only 2 (Two) Buttons
- Connection
with Screw Terminal
- IP65
NEMA 4X (Front)
- DC
Powered
|
The 525K is a full fledge Ratemeter and Totalizer. It can
indicate in rate/sec or minutes, and has a count frequency up
to 10kHz. An overflow condition will be indicated by 1 Hz
flashing of rate value and leading zeroes of totalizer.
The 529K and 530K come available in four different
resolutions, with a Display Range of -19999..0..99999 with
leading zero blanking.
|
|
|
|
