Features

Description

Interchangeable with “Hobbs Minimeter” Low Cost 5 Hour Digits, .150" High, White on Black and Two Decimal Digits Red on Black Operation Indicator Wheel DC Accuracy = .05% Power Required = .2 Watt (DC), 2VA (AC) Temperature: -15°C to 50° C (5° F to 122° F) NEMA 4X/IP65 Sealed Front

Small in size and price, but rugged and durable, this AC or DC powered hour timer is driven by a synchronous motor. Many voltages are available. Four industry standard mounting styles are available. The unit is provided with easy connect, screw terminal connectors on .031" x .250" flat pins. This minimeter is especially designed for use on lighting systems, computers, business machines, control panels, generators, compressors and pumps. Useful also for service records on machinery such as industrial refrigerators, oxygen purifiers, printers or off-road vehicles.

HK17 Series Data Sheet (Size 40 Kilobytes)

Miniature Hour Meter

 

Features

Description

Super Low Power Hours & 1 /100th Resolution 7 Digits with Magnifying Lens .16" (without magnifying lens .11 “) 7 Mounting Styles, Including PCB Mount Models Tiny Size

The HK Series hour meters use a quartz crystal oscillator that generates an impulse every 36 seconds or 0.01 of an hour. The coil is triggered for 32 ms. Max power consumption is needed only after every 36s. The rest of the time the power consumption is max. 2mA. This allows battery operation and use on electronic PC Boards. On times less than 36s are not counted. A very high shock resistance guarantees accurate timing under abnormal conditions.

HK07 Series Data Sheet (Size 27 Kilobytes)

Low Cost Hour Meter

 

Features

Description

UL Listed, CE Certified Low Cost 7 Digit Display (99999.99 Hours) AC or DC Voltages Small Case

These meters are mainly used for monitoring the running time of machines, apparatus and instruments as well as for recording maintenance time, warranty time or rental use time. A synchronous motor operating through a gear train drives the number wheels for the display of full hours 1/10 h and 1/100 h. On AC-versions, the main supply (50 or 60 Hz) is used as frequency standard. On DC-versions the exact frequency generated by means of a quartz crystal. A rugged and completely insulated plastic housing provides substantial protection against environmental influences.

H57 Series Data Sheet (Size 25 Kilobytes)

Combination Hour Meter & Totalizer

 

Features

Description

Dual 7 digit display w/characters magnified to .157" (4mm) Low Cost Isolation protection to VDEO435. AC or DC Voltages

This combination meter comprises a running time totalizer and an adding counter with a separate 7 digit display for each. In the standard version, the two meters are connected in parallel; the totalizer counts the number of pulses while the time meter totalizes the connect time. The time meter displays to hundredths of an hour (36 second intervals). A red visual indicator shows that the unit is operating. The unit is supplied with a clamp clip attachment for mounting and 2.16" x 2.16" (55mm) and 2.16" x 2.16" (72 x 72 mm) bezels are available as accessories. On AC models, the main supply (50 or 60 Hz) is used as the frequency standard. On DC models, the frequency is quartz crystal controlled.

HC77 Data Sheet (Size 24 Kilobytes)

Combination Hour Meter & Totalizer

 

Features	Description
Dual 7 digit display w/characters magnified to 0.157" (4mm) Synchronous Motor Drive Isolation protection to VDEO435. AC Voltages	This combination counter consists of a running time meter and an adding counter. These two meters are connected in parallel, the adding counter registering the total number of events and the time meter the total operating time of the device. Due to high shock resistance, a reliable count is guaranteed.

HC67 Data Sheet (Size 19 Kilobytes)

Multi-Resolution Elapsed Timers

 

Features	Description
All Standard Voltages Electric, Manual, or Non-Reset Available Varied Resolutions Available Varied Mounting Styles Many Options Available	The M Series hours, minutes and seconds timer offers more voltages, reset options and more resolutions than any other electromechanical timer made today. Driven by a solid state circuit, with control line input that insures .05% accuracy, these timers provide instrument level performance.

M Series Data Sheet (Size 22 Kilobytes)

Hour Run Meter with Reset

 

Features	Description
REPLACES HB16 SERIES Operation Indicator: Fast Rotating Gear Wheel Driven By A Synchronous Motor Wide Variety Of Operating Voltages Small Size Long Life Low Cost	This 6 digit hour meter is the perfect timer when low cost, small size and high quality are important. It is available in AC or DC voltages with manual reset. Highly visible white on black hour digits including red on black decimal digits. Unit is also plugable into socket box 945.2.

HB26 Series Data Sheet (Size 37 Kilobytes)

Hour Run Meter

 

Features	Description
Operation Indicator: Fast Rotating Gear Wheel Driven By A Synchronous Motor Wide Variety Of Operating Voltages Less Than 2" Deep	This hour meter is the perfect timer when low cost, small size and high quality are important. It is available in 7 digits without reset. Engine hour meters, rental equipment, maintenance timer and telephone usage are a few of the applications using this timer.

H37 Series Data Sheet (Size 20 Kilobytes)

LCD hour meter 134K/135K

 

Features

• Low-price and high efficiency • Large 8-digit LCD display, height of the figures 8 mm • Optional backlighting • Different time ranges from 0.1 second to 100,000 hours • 0.1 second synchronization makes it suitable for very short activation times • High voltage versions for 10 ... 260 V AC/DC voltage pulses, can be connected directly via contactors, relays and motors • Very high accuracy: 100 ppm • NEMA4/IP65 Front Panel • Screw terminals, RM 5 mm • Lifetime of the battery approximately 8 years • Operating temperature –10 ... +60 °C • Locking of the reset key • Accumulated time always readable thanks to battery*powered LCD display.

LCD hour meter 134K/135K (Size 32 Kilobytes)

Battery Powered Time Indicator

 

Features	Description
Multi-Resolution Time Ranges: Sec., Min. & Sec, Hrs. & Min. or Hrs. & 1/100ths Battery Powered 8 Digit LCD Display Remote & Front Panel Reset NEMA 4X / IP65 Front Panel	The KAL-D TIME1 and KAL-DTIME2 are 8 year, lithium battery powered, elapsed timers with the following resolutions: minutes and seconds (KAL-D TIME1) or, hours and minutes, or hours and 1/100ths (KAL-DTIME2). The front panel meets NEMA 4X/IP65 standards. The display has 8 large digits each 0.276" high.

KAL-DIN Time Data Sheet (Size 32 Kilobytes)

Battery Powered Elapsed Time Indicator

 

Features

Description

6 Digit Display 5-260 VDC or VAC Count Inputs Switch Closure Inputs Programmable Resolution 10 Year Battery Operation 2-Wire Hook-Up Backlit Display (optional) Heated (optional)

Description: The XL-10 timer series offers a wide variety of time bases, crisp, sharp liquid crystal display digits and a built-in power source designed to last 10 years. Digits .5" high readout in hours, minutes or seconds and tenths or hundredths of any basic time resolution. An extruded aluminum housing provides good looks and a rugged frame perfect for most industrial applications. Best of all, simple 2 wire installation makes replacing older electro-mechanical timers a snap. In short, the XL-10 timer brings state of the art technology to electromechanical applications at a price that is designed to fit your budget.

XL-10 Data Sheet (Size 36 Kilobytes)

Elapsed Timer with LED Display

 

Features

Description

Crystal Controlled to .005% Accuracy Programmable Resolution - 1/10ths,1/100ths, 1/1000ths, 1/10,000ths 8 Digits .375" High, 6 Digits .430 High or 4 Digits .600" High Built-in Battery Display Hold Memory Feature Optional BCD Outputs 110/220 - 50 to 400 Hz Power Supply 5 and 12 Volts Available for Peripherals

The new 8200-8400 electronic timers feature crystal controlled accuracy together with built-in DIP switches for convenient field programming. Tenths, hundredths, thousandths, and ten thousandths of either minutes or seconds can be switch selected with quality assured accuracy to ±.005%. In addition, the 8200-8400 features a built-in 110/220 - 50 to 400 Hz power supply, brilliant red orange LED digits and a built-in battery to protect the data from power failure. Varied and attractive mounting styles, optional BCD output, pulse on; pulse off circuitry and economic pricing make the 8200- 8400 a versatile and useful timing instrument.

8200-8400 Series Data Sheet (Size 38 Kilobytes)

Pulse Counters, Position Displays,
Rate Meters, Time Meters & Combinations

 

Features	Description
LED display with very high luminosity 0.315" (8mm) digit height 6 digit display DIN housing, 1.88"x.944" (48x24mm) Easy programming with only 2 buttons Connection with screw terminal IP65 NEMA 4X (front) Input pulse-shape variable (Schmitt Trigger characteristics)	520K Simple Display Counter 521K Totalizer and Position indicator 522K Frequency meter and Tachometer 523K Time meter 524K Multipurpose device 525K Adding Counter and Tachometer 526K 2 Display Counters 527K Display Counter and Timemeter 528K 2 Time meters 529K Analog Display

520K-529K Counter Data Sheet (Size 57 Kilobytes)