Batch Controller

Features

Description

Start/Stop Buttons and Remote Inputs  Programmable K-Factor  Batch Total and Grand Total  Two DPDT Relay Outputs for Two Stage Shut Off  Pulse Input to 20 kHz Count Frequency

The FLOWtrol is a batch controller intended for use with pulse producing flowmeters. The FLOWtrol offers control outputs consisting of DPDT Re-lays rather than SPDT Relays. The Flowtrol may be applied in existing applications seeking to expand their batching operations with compatible units. The FLOWtrol was the fore runner to the BATCHtrol II. However, it lacks the rate display, analog input and Easy Preset capabilities now available in the BATCHtrol II. The BATCHtrol II is recommended for all new applications.

FLOWtrol Data Sheet (Size 19 Kilobytes)

Measures Net Flow of Boiler Fuel    

Features

Description

Flow (A) - Flow (B) Displays Net Rate & Net Total  Pulse Input to 10 kHz Count Frequency  Separate K-Factors for A and B inputs  Set Point Alarms  NEMA 4X/IP65 Front Panel

The KEPtrol F/C is a special version of the KEPtrol R/T designed to measure the net flow of boiler fuel. Separate K-Factors can be entered for A and B inputs. Two SPDT relay alarm outputs are standard. A scaled pulse output is standard for interfacing with remote devices. An analog output is available to interface with strip chart recorders.

KEPtrol Data Sheet (Size 33 Kilobytes)

Temp/Density Compensated Batch Controller

 

Features

Description

Accepts 4-30V Inputs or Pulses Directly From Magnetic Pickup Meters (no pre-amp required)  Takes a Direct 100W Platinum RTD or Analog Signal For Compensation Input  Display Mass or Corrected Volume, Rate, Grand Total, Temperature or Density  Two Way RS232/422 Communications  Scalable 4-20mA Output of Rate/Total

Featuring 8 digits of bright, .55", alpha-numeric display, the MASSbatch can accept up to 10,000 pulses per second and a direct 100W platinum RTD or analog input. The MASSbatch has two separate, 8 digit, floating decimal, “K” factors to convert the inputs to meaningful total and rate data. The user, with the push of a button, can toggle back and forth to view the total of the batch, the rate of flow, temperature or density and the grand total. Two control outputs are provided for two-stage valve control. A scaled pulse output is also provided by an open collector driver. Since the output frequency is user selectable at 10, 200, 2K or 20K Hz, the unit can transmit the count data to remote electro-mechanical or electronic counters as well as computers, programmable controllers or other monitor equipment. An optional analog output allows the user to select low and high settings to control strip recorders or other peripherals.

MASSbatch Data Sheet (Size 26 Kilobytes)

Multi-Function Flow Computer
for Thermal Mass Flowmeters

 

Features

Description

Compatible with Thermal Mass Flowmeters Rate/Total and Batching FunctionsMonitoring and Report Generation Advanced Batching Features: Overrun Compensation, Autobatch Start, Print End of Batch, Slow Fill, 2 Stage Batching Isolated Outputs Standard RS-232 Port Standard, RS-485 Optional Advanced Printing Capabilities Windows™ Setup Software DIN Panel Mount Enclosure with Two Piece Connectors On Board Data Logging DDE Server & HMI Software Available Enhanced Modem Features for Remote Metering NEW! - Attractive Wall Mount Enclosure NEW! - Bench Top Enclosure

The MS720 accepts analog input from Thermal Mass Flowmeter and provide linearization for the sensor and scaling to the flowrate and totalizer indicators. A variety of pulse output, analog outputs, control inputs, relay alarms, and RS232 outputs are provided standard. RS485 Modbus RTU is also an ordering option. Enclosures are available suitable for panel, wall (Nema 4), benchtop, and explosion proof enclosure (Class 1 Div 1 Groups C+D) mounting schemes.

MS-720 Data Sheet (Size 108 Kilobytes)

P295

Miniature Slip Printer

 

Features

Description

• Worlds Smallest Slip Printer • Only 1.6 Kg • Epson's ESC/POS Command Set • Easy-To-Use Touch Panel • Four Print Directions • Auto Eject

Just 1.6kg and ultra compact, the P295 is the worlds smallest slip printer. Select from among 4 print sizes and four printing directions. Or, use page mode to tell the printer where to print the page. The P295 is also equipped with a host of user-friendly features, such as an easy-to-operate touch panel and an automatic paper eject function. The P295 offers printing capabilities of normal, double and quadruple size print in either horizontal or vertical formats. The P295 will print multi-part copies. original and two copies and supports dual cash drawer capability. The P295 is uses a serial interface and meets all world-wide regulatory requirements including UL, CSA and CE mark. The P295 utilizes the PA295 Universal Power Supply Adaptor which is an auto-switching supply. The P295 is Windows and OPOS compliant.

P295 Data Sheet (Size 62 Kilobytes)

DRT

Dual Rate/Totalizer
Two Separate Ratemeters, Totalizers
With Combination Function

 

Features

Description

• Displays A,B,&C Rate & A,B,&C Total • Separate Scaling Factors For A & B Inputs • “C” Displays A+B, A-B, A¸B, & A¸A+B • Pulse Input - 10 kHz Max. • Security Lockout • NEMA 4X / IP65 Front Panel • 30mV Magnetic Pickup Inputs • 4-20mA or 0-20mA Analog Output • CSA Approved

The DRT (Dual Rate Totalizer) is a 5 digit Ratemeter, 6 digit Totalizer in a 1/8 DIN package. User selects 1 of 6 displays to show A, B or C rate and A, B or C total. Inputs A and B have separate scaling to read in engineering units.

DRT Data Sheet (Size 51 Kilobytes)

RTP Series

  Two Separate Ratemeters, Totalizers with Two Line LCD Display

Features

Description

Two Pulse and Three Control Inputs Two Relay/Open Collector and 4-20 mA Analog outputs RS232 / RS485 Port for Serial Communication & Printing Security Lockout NVRAM to retain data in case of power failure NEMA 4 / IP65 Front Panel

The RTP is a presettable Ratemeter and Totalizer from two pulse inputs. It can show rate and total at the same time on the 2 x 16 backlit LCD Display. Both inputs can have up to 16 point linearizing k Factors. The unit can be connected in a network for Data Acquisition.

 

RTP Series Data Sheet (Size 57 Kilobytes)

MS-716

  Flow Totalizer, Ratemeter and
Batcher for Vehicle & Skid Mounting

Features

Description

• NEW! - Vehicle Mount Enclosure; Rugged Aluminum Construction • Provisions for Sealing • "EZ Setup" Guided Setup for First Time Users • Rate/Total and Batching Functions • Menu Selectable Hardware & Software Features • Universal Viscosity Curve (UVC) and API Eq. • Advanced Batching Features: Overrun Compensation, Autobatch Start, Print End of Batch, Slow Fill, 2 Stage Batching • Isolated Outputs Standard • RS-232 Port Standard, RS-485 Optional Advanced Printing Capabilities Windows™ Setup Software • On Board Data Logging • DDE Server & HMI Software Available • Enhanced Modem Features for Remote Metering

The RTP is a presettable Ratemeter and Totalizer from two pulse inputs. It can show rate and total at the same time on the 2 x 16 backlit LCD Display. Both inputs can have up to 16 point linearizing k Factors. The unit can be connected in a network for Data Acquisition.

 

MS-716 (Size 161 Kilobytes)

ES-747

  Flow Computer for Liquid and
Gas Applications

Features

Description

Supports Pulse Producing Flowmeters Rate/Total and Batching Functions Universal Viscosity Curve (UVC) and Strouhal/ Roshko Advanced Linearization Methods Gas & Liquid Flow Equations (Volume, Mass, Corrected Volume) API 2540, AGA-7 Equations 10 Selectable Fluid Tables Advanced Batching Features: Overrun Compensation, Print End of Batch Menu Selectable Hardware & Software Features Data Logging Two Line LCD or VFD Display Isolated Pulse and Analog Outputs Standard RS-232 Port Standard, RS-485 Optional Windows™ Setup Software DDE Server & HMI Software Available

The ES-747 Flow Computer satisfies the instrument requirements for pulse producing turbine flowmeters in liquid and gas applications. Multiple flow equations and instrument functions are available in a single unit with many advanced features. The alphanumeric display shows measured and calculated parameters in easy to understand format. Single key direct access to measurements and display scrolling is supported The versatility of the ES-747 permits a wide measure of versatility within the instrument package. The various hardware inputs and outputs can be “soft” assigned to meet a variety of common application needs. The user “soft selects” the usage of each input/output while configuring the instrument.

ES-747 description continued... The isolated analog output can be chosen to follow volume flow, corrected volume flow, mass flow, temperature, pressure or density by means of a menu selection. Most hardware features are assignable by this method. The user can assign the standard RS-232 Serial Port for data recording, transaction printing, or for connection to a computer. Front panel selection of fluid type is supported. Linearization options include UVC, Strouhal/Roshko and 40 point linearization tables. A Service or Test mode is provided to assist the user during start-up system check out by monitoring inputs and exercising outputs and printing system setup.

 

ES-747 Data Sheet (Size 102 Kilobytes)

MS-748

Rugged, Field Mount
Multi-Function Flow Computery

Features

Description

"EZ Setup"- Guided Setup for First Time Users Liquid, Gas, Steam and Heat Flow Equations Utility Metering Menu Selectable Hardware & Software Features Internal Data Logging Option Isolated Pulse and Analog Outputs Standard RS-232 Port Standard, RS-485 Optional Windows™ Setup Software NX19 Gas Equations, Stacked DP Transmitters DDE Server & HMI Software Available Remote Metering by Wireless or Modem NEW! - Attractive, Rugged, Field Mount Enclosure

Th The MS-748 Flow Computer satisfies the instrument requirements for a variety of flowmeter types in liquid, gas, steam and heat applications. Multiple flow equations are available in a single instrument with many advanced features. The alphanumeric display offers measured parameters in easy to understand format. Manual access to measurements and display scrolling is supported The versatility of the Flow Computer permits a wide measure of versatility within the instrument package. The various hardware inputs and outputs can be “soft” assigned to meet a variety of common application needs. The user “soft selects” the usage of each input/output while configuring the instrument. Consider the following illustrative examples. The isolated analog output can be chosen to follow the volume flow, corrected volume flow, mass flow, temperature, pressure, or density by means of a menu selection. Most hardware features are assignable by this method. The user can assign the standard RS-232 Serial Port for external data logging, transaction printing, or for connection to a modem for remote meter reading. A Service or Test mode is provided to assist the user during start-up system check out by monitoring inputs and exercising outputs. The system setup can also be printed.

 

MS-748 Data Sheet (Size 153 Kilobytes)