Features

Description

5 Large Digits Visible Setpoint Number Counts Up With Output at Preset 5 Amp, Form C Switch Many Voltages Available Rugged Case (50 50 mm)

The BVA is a 5 digit preset counter loaded with features never before offered. The BVA has 2 registers. One shows the set point continuously. The other totalizes the incoming pulses. At coincidence, a 5 Amp form C relay transfers. The totalizer meanwhile continues adding any incoming pulses to the total providing an accurate tally of overrun. One hand sets the BVA. Simply push the conveniently located set buttons and change the preset register. All standard voltages are available in a 50 x 50 mm rugged plastic case.

BVA Data Sheet (Size 70 Kilobytes)

LED Preset Add/Subtr. Counter, Timer, Frequency Meter

 

Features	Description
5 Digit Counter, Timer or Frequency Meter Input Scaling (0.001 to 9.999) Multiplier Bright LED Display .295" (7.5 mm) High Count & Preset Range of -19999 to 99999 Add or Subtract Count Control AC or DC Operation 10 Year Data Memory 24VDC to Power Peripherals	The CTF5 is a LED preset counter, timer or frequency meter. The following features are programmable: operating mode (output at 0 or preset, with or without autoreset), decimal point, polarity of input (NPN or PNP), output signal latched or timed, gate time (frequency meter), time resolution (Hrs., Min., Sec; timer)

CTF5 Data Sheet (Size 27 Kilobytes)

CTF16/17

6 Digit LED Preset Add/Subtract Counter,
Timer, Frequency Meter

 

Features	Description
6 Digit Preset Counter with Sign & Scale Factor Available with One or Two Presets Programmable as a Pulse Counter, Frequency Meter or an Operating Time Counter Wide Range Power Supply 90-250 VAC Counting Speed up to 20 kHz Very Simple Use and Programming by Means of Only 4 Keys RS-232, RS-422, or RS-485 Serial Interface	The CTF16/17 is a 6 Digit preset counter, timer or frequency meter. Application for this widely versatile product includes Preset batch counting, length measuring, simple positioning, time control, speed control, and even rate control.

CTF16/17 Data Sheet (Size 27 Kilobytes)

 

OMNI

Preset Counter

 

Features

Description

AC or DC Powered Low Cost 2, 4 or 6 Digits 10 kHz Maximum Input Relay or Solid State Outputs AC or DC Pulsing

The OMNI is an AC or DC powered electronic preset counter. This instrument is designed for applications where visual display is not required and low cost/small size is important. The Omni features one or two sets of Form C relay contacts at 7 Amps or less. Solid-state outputs are also available. All outputs are field programmable to auto reset at the set point, latch and remain on, alternate on and off or output once momentarily. Auto reset and momentary versions feature field adjustable on times. For inputs, the Omni accepts virtually any AC or DC signal for counting. An optional built-in, self-charging battery insures that no data is lost during power outage. For panel mounting, the Omni is packaged in a rugged, handsome aluminum case with cast aluminum bezel. All versions feature either screw terminal block or PCB edge connector termination. Presetting is accomplished with crisp snap action thumbwheel switches for frequent setting.

OMNI Data Sheet (Size 31 Kilobytes)

 

SCPS

Predetermining Counter

 

Features

Description

Up to 100 kHz Maximum Input 4 or 6 Digits Counts Up and Down 12 VDC Output to Power Peripherals Sensors 0.430" High LED Digits

The SCPS is a 4 or 6 digit, AC or DC powered, single or 2 stage counter that can reach count speeds of up to 100 kHz. The SCPS counts up to the preset number or down from the preset. Its built-in 110/220-50 to 400 Hz power supply both powers the counter and generates 80 milliamps of 12 Volts to power input devices. Outputs feature 10 Amp relays, 2 Amp triacs or open collector transistor outputs. The SCPS case is rugged aluminum with cast aluminum bezel. Surface, wall and panel mounting together with up to 6 brilliant .43" red orange LED’s make the SCPS a versatile, rugged and attractive preset counting instrument.

SCPS Data Sheet (Size 33 Kilobytes)

 

KEPtrol

Counter, Timer or Ratemeter

 

Features

Description

Counter, Timer or Ratemeter Counts Up To 100 kHz 8 Digit Display Input Scaling Batch Counter DC Output to Power Peripherals Sensors NEMA 4X / IP65 Sealed Front Panel

Featuring 8 digits of bright .55 inch alpha-numeric display, the KEPtrol can accept up to 100,000 pulses per second of digital count or rate data, and time in keyboard selected ranges of 1/10,000 of a second to hours. The unit can multiply the input from 0.0001 to 99.9999 to easily understood units of measurement and give two control outputs at separate set points.      Selection of counter, timer or rate meter function as well as input scaling, timer frequency, preset levels, output timing and special security number are entered on the sealed front keypad by following instructions written on the display.      The unit operates from either 110 VAC /12 to 27 VDC or optional 220 VAC /12 to 27 VDC. If AC power is used, two built-in regulated 12 VDC ~100 mA power supplies are offered. They can be connected to provide + 12 VDC and -12 VDC or + 24 VDC to drive external devices. CMOS logic is used to provide high noise immunity and low power consumption with EEPROM to hold data a minimum of 10 years if power is interrupted.      Integrating the KEPtrol with computers or programmable controllers is made easy by optional RS232 or RS422 interface. Up to 15 units can be addressed separately to set control points or access data through the I/0 ports.

KEPtrol Data Sheet (Size 33Kilobytes)

Low Cost, Pulse Input Position Monitor

Features

Description

2 Control Set Points with Selectable Start Point 5 Digit Floating Point Decimal Scaling Factor Display From -99999 to 999999 Pulse Input - 30 kHz Maximum Separate Up and Down Inputs Quadrature & Pulse Input with Up/down Control NEMA 4X / IP65 Sealed Front Panel

Featuring 6 digits of bright, 7-segment LED displays, the Positrol is a position monitor which accepts signal inputs up to 30 kHz. A 5 digit floating decimal scale factor allows a readout in true engineering units. The unit has two, programmable alarm set points from -99999 to 999999 and a selectable start point. These setpoints control two 5 Amp relays. A two stage panel lock prohibits menu changes from unauthorized personnel.

Positrol Data Sheet (Size 42Kilobytes)

Low Cost, Pulse Input Productivity Shift Monitor

 

Features	Description
Monitor Up to 4 Separate Shifts Separate 5 Digit Preset Counter Separate 5 Digit Scaling Factors For Shifts and Preset Counter Pulse Input - 10 kHz Maximum EEPROM Memory Stores All Program & Data Values For 10 Yrs. 1/8 DIN Cutout NEMA 4X / IP65 Sealed Front Panel	Featuring 6 digits of bright, 7-segment LED displays, the SHIFTtrol is a shift monitor which accepts signal inputs up to 10 kHz. The 5 digit dividing scale factors allow readouts in true engineering units. The unit has two, programmable alarm set points. These setpoints control two 5 Amp relays. A two stage panel lock prohibits menu changes from unauthorized personnel.

SHIFTtrol Data Sheet (Size 49Kilobytes)

Self Powered, Preset Counter Replaces Electro-mechanical. Counters

 

Features
Internal Battery Powered (8 years) Programmable N.O. or N.C. Relay Output Replaces Electromechanical Units 6 Digit LCD Display Main & Lower LCD Displays Indicate Counter and Preset Values without External Power Add or Subtract Count Control Optically Isolated Count and Reset Inputs

KALTrol-SP Data Sheet (Size 61 Kilobytes)

Electronic Preset Counter/Timer Replaces Electro-mechanical. Units

 

Features
Replaces Electromechanical Units Main & Subsidiary 6 Digit, LCD Displays Indicate Counter/Timer and Preset Values Add or Subtract Count/Time Control AC or DC Operation 10 Year Data Memory (Battery) 12VDC to Power Peripherals NEMA 4X / IP65 Sealed Front Panel

KATtrol Data Sheet (Size 27 Kilobytes)

 

903K & 904K

LCD Preset Add/Subtr. Counter, Timer, Frequency Meter

 

Features	Description
6 Digit Counter, Timer or Frequency Meter 2 Preset Values (Type 903K 1 Preset) Input Scaling (0.0001 to 9.9999) Multiplier 2-Line LCD Display Count & Preset Range of -999999 to 999999 Add or Subtract Count Control AC or DC Operation Secondary Preset Batch Counter (904K) 24VDC to Power Peripherals	The 903K/904K Series is a LCD preset counter, timer or frequency meter. The following features are programmable: operating mode, polarity of inputs, input mode, multiplying factor, decimal point. output signals to be permanent or timed automatic reset gate time when programmed as a frequency meter timer resolution (s, min, h or h:min:s)]

903K & 904K Data Sheet (Size 41 Kilobytes)

 

MINItrol (MRT)

Low Cost, Pulse Input Totalizer/Ratemeter

 

Features

Description

CSA Approved Separate Scaling Factors For A & B Inputs Display Rate & Total Pulse Input - 10 kHz Max. Security Lockout RS422/RS232 Serial Communication NEMA 4X / IP65 Front Panel Separate Add/Subtract Simultaneous Inputs Quadrature & U/D Direction Control Inputs 30mV Magnetic Pickup Inputs 4-20mA or 0-20mA Analog Output

The MINItrol is a 6 digit totalizer / ratemeter with two level, 5 digit preset alarm control of total or rate. Inputs A & B have separate scaling K-factors. The totalizer can be programmed for “A” subtract “B”, “A” add “B” or A & B as separate totalizers, with display and control of the “net” total and rate of "A". The MINItrol is also available in 4 other versions. MC2: a two preset totalizer with scaling, MR2: a high/low alarm ratemeter with scaling; The “MC”: a totalizing counter only, and the “MR”: a rate meter display only. If only one input is required, the unit will display the total and rate from that one channel. The MINItrol can accept up to 10,000 pulses per second. It has a 5 digit floating decimal scale factor allowing total readout in true engineering units and rate per second, minute or hour. Input “A” simultaneously drives a ratemeter which can be programmed to display the basic frequency (rate per second) or factored to show rate per minute or rate per hour. Simply push the “VIEW” button to see either total or rate without losing a count. Two separate 5 A relay contacts can be set to operate at either rate or total presets in a latch or auto-recycle mode with output timing from 0.1 to 99.9 seconds. Two control outputs can be assigned to either the totalizer or ratemeter and can automatically recycle at the batch or stay latched until reset. Up to 99 units can communicate to a host computer on a single RS232 or RS422 loop. When two inputs are received (A & B), the unit can either add or subtract the two inputs or display the two inputs as separate totalizers.

MINItrol (MRT) Data Sheet (Size 33 Kilobytes)

 

DRT

Two Separate Ratemeters, Totalizers with Combination Function.

Features	Description
Displays A, B, & C Rate & A, B, & C Total Separate Scaling Factors for A & B Inputs "C" Displays A+B, A-B, A/B, & A/A+B Pulse Input - 10kHz Max Security Lockout NEMA 4X / IP65 Front Panel CSA Approved	The DRT (Dual Rate Totalizer) is a dual 5 digit Ratemeter 6 digit Totalizer in a 1/8 DIN Package. It has been CSA Approved, and has two separate K Factors that are used to convert the input pulses into engineering units.

DRT Data Sheet (Size 49 Kilobytes)

 

INTELLECT-69

Ratemeter/Totalizer From Analog Inputs

 

Features

Description

High/Low Scaling From Front Panel 2 Set Points Assignable To Rate Or Total Display Rate (pressure, level, watts, etc.), Peak & Valley and Integrated Total 0-5V, 0-10V, 1-5V, 4-20mA or 0-20mA Analog Input NEMA 4X/IP 65 Front Panel +24V Output For Peripherals RS422/232 Serial Communications 4-20mA Output Square Root Extraction

The Intellect-69 is an integrating totalizer/ratemeter which accepts analog signal inputs. The unit can be field programmed to accept 4-20mA, 0-20mA, 0-5V, 0-10V or 1- 5V signals. An optional Square Law input is available for inputs that require square root extraction. A 4-20mA output option is available to control strip recorders or other peripherals. Two assignable set points are standard for two stage shut off. The high and low scaling settings are programmable from the front panel. By pressing the "view" button, the unit will display: integrated total, rate, peak or valley. Press the "lock" key once to freeze the display. RS422 or RS232 serial communications are available options for data communication with a host computer.

Intellect 69 Data Sheet (Size 30 Kilobytes)