HVA

Features

Description

24 Hour (AM & PM), 7 Day Programming 12 Programs Provide Up To 6 ON & 6 OFF Events Per Day / Week 16 A @ 240 V SPDT Switching Rechargeable Battery Backup With 7 Day Carry-Over Manual Override Several Mounting Styles Available

The DT12 is an electronic time switch. This one channel control has 24 hour and 7 day programming with 6 ON and 6 OFF setpoints with 3 block programs for different weekday schedules. The LCD display shows time of day in AM/PM format and provides output status indication. The DT12 is programmable to the minute and also offers a manual override for ON or OFF to the next scheduled event. Standby operation is provided for a minimum of 7 days with a built-in rechargeable NiCad battery.

Preset Timer

 

Features

Description

AC or DC Powered 2, 4 or 6 Digits Relay or Solid State Programmable Outputs Remote & Front Panel Reset Switch Closure or DC Inputs .005% Accuracy

The OMNI is an AC or DC powered, up to 6 digit, electronic preset timer. This instrument is designed for applications where visual display is not required but high accuracy and low cost/small size are important. The Omni features one or two sets of Form C relay contacts both rated 7 Amps or greater. Solid-state outputs are also available. All outputs are field programmable to auto reset at the set point, latch and remain on, alternate on and off, or output once momentarily. Auto reset and momentary versions feature field adjustable on times. The Omni accepts a 3 to 30 Volt DC signal for timing. An optional built-in self-charging battery insures that no data is lost during power outage. For panel mounting the Omni is packaged in a rugged handsome aluminum case with cast aluminum bezel. All versions feature either screw terminal block or PCB edge connector termination. Presetting is accomplished with crisp snap action thumbwheel switches for frequent setting.

 

Features

Description

6 Large, LED Digits Contact Closure, 3 to 30 Volt DC Start/Stop Pulse AC or DC Power Remote & Font Panel Reset Screw Terminal Connection NEMA 4X / IP65 Front Panel

The INT62A is a low cost, highly accurate 6 digit timer. The large, brilliant .6" red-orange LED’s show the elapsed time. If there is a failure of the AC or DC power source, an internal memory system will retain all of the important information for at least ten years without any battery. The unit is housed in a NEMA 4X/IP65 front, DIN standard panel mount enclosure. See “Timer Switch Settings” section for “Time Base” ranges. The keypad is used to divide the “Time Base” from 1 to 100, change the decimal point, key-in preset times and reset the timer.

INT62A Data Sheet (Size 34 Kilobytes)

---

SCPT

Features

Description

6 Large, LED Digits Contact Closure, 3 to 30 Volt DC Start/Stop Pulse AC or DC Power Remote & Front Panel Reset Screw Terminal Connection Times Up or Down

The SCPT is a 4 or 6 digit, AC or DC powered, single or 2 stage timer with an internal crystal 10 kHz time base. The SCPT times up to the preset number or down from the preset. The 110/220-50 to 400 Hz power supply powers the timer and generates 80 mA of 12 Volts to power input devices. Outputs feature 10 Amp relays, 2 Amp triacs or open collector transistor outputs. The SCPT case is rugged aluminum with cast aluminum bezel. Surface, wall and panel mounting together with up to 6 brilliant .430" red orange LED’s make the SCPT a versatile, rugged and attractive preset timing instrument.

SCPT Data Sheet (Size 33 Kilobytes)