| Ratemeters
& Totalizers |
Ratemeter /
Totalizer From Analog Inputs
- High/Low Scaling From Front Panel
- 2 Set
Points Assignable To Rate Or Total
- Display
Rate (pressure, level, watts, etc.),
Peak &
Valley and Integrated Total
- 0-5V,
0-10V, 1-5V, 4-20mA or 0-20mA
Analog
Input
- NEMA
4X/IP 65 Front Panel
- +24V
Output For Peripherals
- RS422/232 Serial Communications
- 4-20mA
Output
- Square
Root Extraction
- Optional Rate Per Day Feature
|
Featuring 6
digits of bright, 7-segment LED displays, the Intellect-69 is
an integrating totalizer/ratemeter which accepts analog signal
inputs. The unit can be field programmed to accept 4-20mA,
0-20mA, 0-5V, 0-10V or 1-5V signals. An optional Square Law
input is available for inputs that require square root
extraction. A 4-20mA output option is available to control
strip recorders or other peripherals. Two assignable set
points are standard for two stage shut off. The high and low
scaling settings are programmable from the front panel. By
pressing the "view" button, the unit will display: integrated
total, rate, peak or valley. Press the "lock" key once to
freeze the display. RS422 or RS232 serial communications are
available options for data communication with a host
computer. |
Low Cost, Pulse
Input Totalizer/Ratemeter
- CSA
Approved
- Separate Scaling Factors For A & B Inputs
- Display
Rate & Total
- Pulse
Input - 10 kHz Max.
- Security Lockout
- RS422/RS232 Serial Communication
- NEMA 4X
/ IP65 Front Panel
- Separate Add/Subtract Simultaneous Inputs
- Quadrature & U/D Direction Control Inputs
- 30mV
Magnetic Pickup Inputs
- 4-20mA
or 0-20mA Analog Output
|
The MINItrol
is a 6 digit totalizer / ratemeter with two level, 5 digit
preset alarm control of total or rate. Inputs A & B have
separate scaling K-factors. The totalizer can be programmed
for “A” subtract “B”, “A” add “B” or A & B as separate
totalizers, with display and control of the “net” total and
rate of "A". The MINItrol is also available in 4 other
versions. MC2: a two preset totalizer with scaling, MR2: a
high/low alarm ratemeter with scaling; The “MC”: a totalizing
counter only, and the “MR”: a rate meter display only. If only
one input is required, the unit will display the total and
rate from that one channel. The MINItrol can accept up to
10,000 pulses per second. It has a 5 digit floating decimal
scale factor allowing total readout in true engineering units
and rate per second, minute or hour.
Input “A”
simultaneously drives a ratemeter which can be programmed to
display the basic frequency (rate per second) or factored to
show rate per minute or rate per hour. Simply push the “VIEW”
button to see either total or rate without losing a count. Two
separate 5 A relay contacts can be set to operate at either
rate or total presets in a latch or auto-recycle mode with
output timing from 0.1 to 99.9 seconds.
Two control
outputs can be assigned to either the totalizer or ratemeter
and can automatically recycle at the batch or stay latched
until reset.
Up to 99 units can communicate to a host
computer on a single RS232 or RS422 loop.
When two inputs
are received (A & B), the unit can either add or subtract
the two inputs or display the two inputs as separate
totalizers. |
Totalizer/Ratemeter with Separate
Scaling of Rate/Total
- Separate Scaling Factors For Rate & Total
- Display
Rate & Total
- Count
Inhibit Input
- Security Lockout
- RS422/RS232 Serial Communication
- NEMA 4X
/ IP65 Front Panel
- 4-20mA
or 0-20mA Analog Output
|
The Minitrol-S is a single input
totalizer/ratemeter. The
totalizer and ratemeter each have their own 5 digit dividing
scale factor. The two 5 AMP preset relay outputs can be
programmed by the user to apply to the “A” total counter or
the “A” ratemeter. The user can view the rate, total and grand
total. The B relay can be used to create a scaled pulse
output. Magnetic pickup input, analog output and RS232
communication options are
available. |
Totalizer/Ratemeter for
Paddle or
Pelton Wheel Turbine Flowmeters
- Separate Scaling Factors For A & B Inputs
- Display
Rate & Total
- Pulse
Input - 10 kHz Max.
- Security Lockout
- RS422/RS232 Serial Communication
- NEMA 4X
/ IP65 Front Panel
- 4-20mA
or 0-20mA Analog Output
|
The
Minitrol-PW is a single input counter/ratemeter intended for
use with low flow paddle or pelton wheel turbine flowmeters.
Two scale factors are used to describe the flowmeter
calibration characteristics. The two 5 AMP preset relay
outputs can be programmed by the user to apply to the "A"
total counter or the "A" ratemeter. The user can view the
rate, total and grand
total. |
Economical Flow
Totalizer,
Ratemeter and Batcher
- Multiple Instrument Functions
- Menu
Selectable Hardware Features
- Two
Line LCD or VFD Display
- Automatic Batch Overrun Compensation
- Isolated Pulse Output Standard
- RS-232
Port Standard, RS-485 Optional
- DIN
Enclosure with Two Piece Connectors
- EZ
Setup Feature
- DDE
Server & HMI Software Available
|
The
SUPERtrol-I LE Flow Computer satisfies the instrument
requirements for a variety of pulse producing flowmeter types
in liquid applications.
The
alphanumeric display shows measured and calculated parameters
in easy to understand format. Single key direct access to
measurements and display scrolling is supported
The
SUPERtrol-I LE can be programmed for rate/total indication or
batching. The various pulse inputs and outputs can be “soft”
assigned to meet a variety of common application needs. The
user “soft selects” the usage of each pulse input while
configuring the instrument.
The user
can assign the standard RS232 Serial Port for data logging,
transaction printing, or for connection to a modem for remote
meter reading. An optional RS-485 serial port using Modbus RTU
protocol is available.
A Service
or Test mode is provided to assist the user during start-up
system check out by monitoring inputs and exercising outputs.
The system setup can also be printed.
|
Multi-Function
Flow Totalizer, Ratemeter
and Batcher
- "EZ
Setup" Guided Setup for First Time Users
- Multiple Instrument Functions
- Menu
Selectable Hardware & Software Features
- Two
Line LCD or VFD Display
- Universal Viscosity Curve (UVC) and API Eq.
- Advanced Batching Features: Overrun
Compensation,
Autobatch
Start, Print End of Batch
- Isolated Outputs Standard
- RS232
Port Standard, RS-485 Optional
- DIN
Enclosure with Two Piece Connectors
- Windows
TM Setup Software
- On
Board Data Logging
- DDE
Server & HMI Software Available
|
The
SUPERtrol-I Flow Computer satisfies the instrument
requirements for a variety of flowmeter types in liquid
applications. Multiple flow equations and instrument functions
are available in a single unit with many advanced features.
The
alphanumeric display shows measured and calculated parameters
in easy to understand format. Single key direct access to
measurements and display scrolling is supported
The
versatility of the SUPERtrol-I permits a wide measure of
versatility within the instrument package. The various
hardware inputs and outputs can be “soft” assigned to meet a
variety of common application needs. The user “soft selects”
the usage of each input/output while configuring the
instrument.
The
isolated analog output can be chosen to follow volume flow,
corrected volume flow, mass flow, temperature, or density by
means of a menu selection. Most hardware features are
assignable by this method.
The user
can assign the standard RS232 Serial Port for data logging,
transaction printing, or for connection to a modem for remote
meter reading.
A Service
or Test mode is provided to assist the user during startup
system check out by monitoring inputs and exercising outputs
and printing system setup.
|
Two Separate Ratemeters,
Totalizers
with Combination Function
- Displays A,B,&C Rate & A,B,&C
Total
- Separate scaling factors for A & B Inputs
- "C"
Displays A+B, A-B, A/B, & A/(A+B)
- Pulse
Input - 10 kHz Max
- Security Lockout
- NEMA
4X/IP 65 Front Panel
- 30mV
Magnetic Pickup Inputs (optional)
- 4-20mA
or 0-20mA Analog Output (optional)
- CSA
Approved
|
The DRT is a Dual
Rate Totalizer. It is a dual 5 digit, 2 preset
Ratemeter/Totalizer in a 1/8 DIN Package. The user can select
1 of 6 displays to show A, B or C rate, and A, B, or C total.
Inputs A and B also have separate scaling to read in
engineering units. |
Two Separate Ratemeters,
Totalizers with Two Line LCD Display
- Two
Pulse and Three Control Inputs
- Two
Relay/Open Collector and 4-20 mA Analog outputs
- RS232 /
RS485 Port for Serial Communication & Printing
- Security Lockout
- NVRAM
to retain data in case of power failure
- NEMA 4
/ IP65 Front Panel
|
The RTP is a
presettable Ratemeter and Totalizer from two pulse inputs. It
can show rate and total at the same time on the 2 x 16 backlit
LCD Display. Both inputs can have up to 16 point linearizing k
Factors. The unit can be connected in a network for Data
Acquisition.
|
Totalizer/Ratemeter
- Pulse
or Analog Input
- Display
Total, Rate or Grand Total
- Two
Alarm Outputs, User Selectable for Total,
Rate or Grand
Total
- Pulse
Input to 20 kHz Count Frequency
- K-Factor Programmable to 8 Places
- Two
Stage Security Lockout
- Two Way
RS232/422/ Communications Option
- NEMA
4X/IP 65 Front Panel
- Scalable Analog Output of Rate or Total
- 16
Point Linearization Option
|
Featuring 8
digits of bright, .55", alpha-numeric display, the pulse input
version of the KEPtrol R/T can accept up to 20,000 pulses per
second. The analog input version accepts inputs, such as 4 to
20mA or 1 to 5V. It uses a highly linear integrator (V to F
converter) to generate 0 to 10 kHz digital pulses. The
standard KEPtrol R/T has two separate, 8 digit, floating
decimal, “K” factors to convert the inputs to meaningful total
and rate data. An optional 16 point K-factor can linearize
flow from meter outputs. The user, with the push of a button,
can toggle back and forth to view the total of the batch, the
rate of flow and the grand total count. Two control outputs
can be assigned independently by the user to activate at
preset batch total, rate or grand total for .1 to 9.9 seconds
or until reset.
A scaled pulse output is also provided by
an open collector driver. Since the output frequency is user
selectable at 10, 200, 2K or 20K Hz, the unit can transmit the
total data to remote electro-mechanical or electronic
totalizers as well as computers, programmable controllers or
other monitor equipment.
An optional analog output allows
the user to select low and high settings to control strip
chart recorders or other peripherals. Up to 15 units can be
connected to optional RS232 or RS422 communications port to
set control points or access data. With RS422M it is possible
to communicate with up to 256 units on a single serial link.
This option is also compatible with Opto 22’s Optomux
Network. |
Rate and Total
Indicators with
Pulse or Analog Inputs
- 6
Digit, LED Display with Very High Luminosity 0.315" (8mm)
Digit height
- DIN
Housing, 1.88"x9.44"
- Easy
Programming with Only 2 (Two) Buttons
- Connection with Screw Terminal
- IP65
NEMA 4X (Front)
- DC
Powered
|
The 525K is
a full fledge Ratemeter and Totalizer. It can indicate in
rate/sec or minutes, and has a count frequency up to 10kHz. An
overflow condition will be indicated by 1 Hz flashing of rate
value and leading zeroes of totalizer.
The 529K and
530K come available in four different resolutions, with a
Display Range of -19999..0..99999 with leading zero blanking.
|
|
|
|
