5 Digit Scaling Factor Display Rate, Batch Size and (Batch Total or Grand Total) Second B Relay Programmable for Output at Prewarn or selected Batch/Grand Total Pulse Input - 10 kHz Max. Security Lockout RS422/RS232 Serial Communication NEMA 4X / IP65 Front Panel 30mV Magnetic Pickup Inputs 4-20mA or 0-20mA Analog Output

The MINI-Batcher is a 6 digit totalizer and 4.5 digit ratemeter with two relay outputs. One output is dedicated to the batch amount (Preset A), the other can be activated for Prewarn or Batch/Grand Total. The unit can count up to the preset (reset to 0) or down from the preset (set to preset). Start, Stop and Reset functions can be activated from the front panel or remote inputs. An analog output (assignable for Rate or Batch Amount) is available for data logging. Up to 99 units can communicate to a host computer on a single RS232 or RS422 loop.

MB2 (Mini-Batcher) Data Sheet (Size 33 Kilobytes)

Economical Flow Totalizer, Ratemeter and Batcher

Features

Description

 

Multiple Instrument Functions Menu Selectable Hardware Features Two Line LCD or VFD Display Automatic Batch Overrun Compensation Isolated Pulse Output Standard RS-232 Port Standard, RS-485 Optional DIN Enclosure with Two Piece Connectors EZ Setup Feature DDE Server & HMI Software Available

The SUPERtrol-I LE Flow Computer satisfies the instrument requirements for a variety of pulse producing flowmeter types in liquid applications. The alphanumeric display shows measured and calculated parameters in easy to understand format. Single key direct access to measurements and display scrolling is supported The SUPERtrol-I LE can be programmed for rate/total indication or batching. The various pulse inputs and outputs can be “soft” assigned to meet a variety of common application needs. The user “soft selects” the usage of each pulse input while configuring the instrument. The user can assign the standard RS-232 Serial Port for data logging, transaction printing, or for connection to a modem for remote meter reading. An optional RS-485 serial port using Modbus RTU protocol is available. A Service or Test mode is provided to assist the user during startup system check out by monitoring inputs and exercising outputs. The system setup can also be printed.

SUPERtrol I LE Data Sheet (Size 51 Kilobytes)

Multi-Function Flow Totalizer,
Ratemeter and Batcher

Features

Description

 

"EZ Setup" Guided Setup for First Time Users Multiple Instrument Functions Menu Selectable Hardware & Software Features Two Line LCD or VFD Display Universal Viscosity Curve (UVC) and API Eq. Advanced Batching Features: Overrun Compensation, Autobatch Start, Print End of Batch Isolated Outputs Standard RS-232 Port Standard, RS-485 Optional DIN Enclosure with Two Piece Connectors Windows&nbspTM Setup Software On Board Data Logging DDE Server & HMI Software Available

The SUPERtrol-I Flow Computer satisfies the instrument requirements for a variety of flowmeter types in liquid applications. Multiple flow equations and instrument functions are available in a single unit with many advanced features. The alphanumeric display shows measured and calculated parameters in easy to understand format. Single key direct access to measurements and display scrolling is supported The versatility of the SUPERtrol-I permits a wide measure of versatility within the instrument package. The various hardware inputs and outputs can be “soft” assigned to meet a variety of common application needs. The user “soft selects” the usage of each input/output while configuring the instrument. The isolated analog output can be chosen to follow volume flow, corrected volume flow, mass flow, temperature, or density by means of a menu selection. Most hardware features are assignable by this method. The user can assign the standard RS-232 Serial Port for data logging, transaction printing, or for connection to a modem for remote meter reading. A Service or Test mode is provided to assist the user during start-up system check out by monitoring inputs and exercising outputs and printing system setup.

SUPERtrol I Data Sheet (Size 57 Kilobytes)

Batch Controller With Two Stage Valve Control

Features

Description

 

 

Start/Stop Buttons & Remote Inputs Separate 8 Digit K-Factors For Rate & Total Accepts Pulse or Analog Inputs Displays Rate, Total and Grand Total Security Lockout with Missing Pulse Detection Scaled Pulse Output Two Way RS232/422 Communications Option 2 Setpoints For Two Stage Valve Control NEMA 4X (IP65) Front Panel

Featuring 8 digits of bright, .55 inch, alpha-numeric display, the BATCHtrol II can accept up to 20,000 pulses per second of digital count. The analog input versions accept inputs, such as 4 to 20 mA or 1 to 5V. It uses a highly linear integrator (V to F converter) to generate 0 to 10 kHz digital pulses. The standard unit has two separate, 8 digit, floating decimal, "K" factors to convert the inputs to meaningful total and rate data. An optional 16 point K-factor can linearize flow from nonlinear meter outputs. The user, with the push of a button, can toggle back and forth to view the total of the batch, the rate of flow or the grand total of flow. The BATCHtrol II may be thought of as two separate counters and a ratemeter. The "batching" counter counts to prewarn and preset numbers entered by the user and enables separate control outputs. The "totalizing" counter gives a cumulative reading or grand total. Finally, the ratemeter counts the number of pulses per second and, with its scaling feature, can provide gallons per minute or any other rate measurement without the totalizer losing counts. At any time, the user may view the total, the grand total or the rate while never interrupting the counting process. Setup is done through the front panel and the menu driven software in the unit. Start-Stop control can be activated via the front panel buttons or remote inputs. The unit operates from either 110 VAC/12 to 27 VDC, or optional 220 VAC/12 to 27 VDC. If AC power is used, two built-in regulated 12 VDC @ 100 mA power supplies are offered. They can be connected to provide +12 VDC and -12VDC or +24 VDC to drive external devices. CMOS Logic is used to provide high noise immunity and low power consumption with EEPROM to hold data a minimum of 10 years if power is interrupted. Up to 15 units can be connected to optional RS232 or RS422 communications port to set control points or access data.

BATCHtrol II Data Sheet (Size 51 Kilobytes)